Posts Tagged ‘gadgets’

IN THE FIELD: Just South Of Yankee Ingenuity

September 5, 2012 27 comments

When using tripod in the field, I have often found myself facing the challenge of making the transition from a horizontal to a vertical orientation. I am forced to loosen the adjustment knobs so I can flop the camera into the vertical orientation, then move the tripod to the side a little bit in order to re-compose the shot. And it is a rather annoying experience to attempt to capture a vertical image with a camera that is not centered over the tripod.

Several manufacturers have risen to the occasion over the years to solve this dilemma and developed an “L” Bracket configuration. These devices mount to the bottom of your camera in the tripod socket, then the camera and bracket are inserted into a quick release device mounted to your tripod head. These brackets allow you to shoot in the horizontal format then easily convert to a vertical. Simply release the camera from the quick release, rotate the camera 90 degrees to the vertical format and re-mount it in the quick release. Now everything is centered on the tripod.

Kirk Enterprises and Really Right Stuff are just two of the manufacturers of “L” Brackets and quick release plates. They build great quality products, but depending on your budget, they can be on the expensive side.

I have been using a quick release system from Manfrotto for years, but unfortunately their camera plates are not compatible with other manufacturers. And a new system was more than I wanted to spend. Besides, I like my Manfrotto. My problem was, I still wanted that “L” Bracket for the added convenience in the field.

So I reached for my pirate’s hat and came up with my own version of an “L” Bracket which would be compatible with my Manfrotto parts. After making some preliminary calculations, I headed down to the hardware store and bought a strip of aluminum, some machine screws and nuts. I bent the aluminum to shape, cut the piece to length, then measured and drilled the appropriate holes for mounting purposes and for my cable release. Next, I mounted the quick release plates to the aluminum strip. Then I placed a strip of thin rubber between the bracket and the bottom of the camera for protection, and tightened the whole assembly.

Presto…a homemade “L” Bracket and quick release system and it only cost me $13.53 including tax. Now when I want to shoot a vertical composition, I simply mount the camera in that position. And if I want my next shot to be a horizontal, I open the quick release and mount the camera in that format.

Now, I never have to re-position the tripod, and it’s way faster to set up. Yabba-dabba-dooo!!!